Fix It Sticks Scope Jack

Fix It Sticks FIS-SJACK Overview

The Scope Jack from Fix It Sticks is a clever gadget for making sure your riflescope is perfectly level for maximum shot accuracy. With the scope mounted on your rifle, slide the jack underneath and tighten it onto the Picatinny rail. Then turn the jack handle to elevate the lifting arm to press up on the flat section of your scope beneath the turrets. Tighten the cap screws on your mounting rings and you’re done. Note that the jack only works with scopes that have a flat section of maintube, and at least 0.25″ of clearance between the rail and the scope is required.

• Needs a minimum of 0.25″ clearance between rail and scope bottom
• Works on any scope with a flat section under the turrets
• The NATO/Pic rail must be accessible under the optic
• Will not work with one-piece mounts
• In cases of minimal clearance, it may be necessary to remove the thumb screw and clamp, then slide the Scope Jack onto the rail from the side and reassemble

UPC: 696177784845

Items Included

• Fix It Sticks Scope Jack
• Limited 2-Year Manufacturer Warranty

Additional Resources

User Manual

0.6 MB

Fix It Sticks FIS-SJACK Specs

Physical

Packaging Info

All product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.